Email to a Friendclose
DescriptionCentral Montana is home to cowboys, roughnecks, and fly fishers, all with three defining traits—spurs, steel toes, and Simms. For those occupying the latter category, Simms’ G3 Guides™ raise the bar with a RiverTread™ platform bolstered by proprioception, which minimizes rigid underfoot materials in order to enhance feel whether on the trail or in the water. The felt G3 combines all-day wading comfort with the angler-appreciated underwater traction of a 12mm felt outsole, compatible with all Simms’ AlumiBite™ and HardBite™ cleats and studs. Additional features include TPU molded heel clips that lock in fit, while the neoprene lining stacks cushioning where it counts, keeping feet warm and delivering easy on/off performance.
FeaturesMATERIAL TECH: Waterproof nubuck leather & TPU-coated textile upper, RiverTread™ platform/12mm Felt outsole
- A 12mm felt outsole version of the Guide Boot for a lighter, yet more durable balance of wet trail & all-day wading
- Simms NEW RiverTread™ platform for guide-ready wading comfort, support & traction
- TPU molded heel clip for positive heel fit & hiking security
- Partially-lined with neoprene for wading warmth, cushioning & easy-on/easy-off
APPROX. PAIR WEIGHT (size 10): 60.8 oz
SIZES: 07-14, whole sizes, EEE width
- Size Chart
Men's Wading Boot Size Chart
To allow proper room for the neoprene stockingfoot, find your regular shoe size in the right-hand columns and order the corresponding Simms Boot in the first column. This will typically be one size up from your normal shoe size for men and one size down for women (ie: a women's USA size 8 would take a men's boot size 7).
(Simms Boot size 5 will fit a Youth Size 4, etc.)
5** 4 37 3 22 6** 5 38 4 23 7 6 39 5 24 8 7 40 6 25 9 8 41 7 26 10 9 42 8 27 11 10 43 9 28 12 11 44 10 29 13 12 45 11 30 14 13 46 12 31 15** 14 47 13 32 16** 15 48 14 33
Not all styles available in all sizes; please see individual boot for size specifics
** Freestone Boot - Streamtread only
Simms G3 Guide™ Boot
- Product Care
Guide Boot Care:
For proper cleaning of your footwear to descrease the likelihood of spreading Aquatic Invasive Species, please reference our CleanStream™ page.
Guide boots are made water-repellent full grain Nubuck leather. They require little maintenance but should be cleaned and dried.
If using in saltwater always clean and rinse to prevent corrosion.
Use a brush to remove dust and dirt. Choose an old vegetable brush or toothbrush. For maximum thoroughness, remove laces prior to cleaning. Use specialized boot cleaner, saddle soap or maybe a mild dishwashing soap with luke-warm water.
Do not use bar soap or detergents.
Do not place wet boots close to a heat source (fireplace, campfire, wood stove, radiator, heater, sunny windowsill) as this can weaken adhesives and cause materials to become brittle or shrink.
Dry using natural methods (air dry) and try to keep them out of the sun for long periods of time. Boots dry faster when positioned upside-down. If desired, stuff a sheet or two of newspaper into each boot to absorb moisture. Change the paper each hour.
If you see any mold on your boots, brush in a mixture of 80% water and 20% vinegar.
Over time the use of leather conditioners may provide increased water repellency and can prevent cracking and drying of the leather.
Store boots in a place where temperatures are stable and normal. Do not store boots in attics, garages, car trunks or any unventilated spaces.
Never put boot in washing machine.
CleanStream™ is a design philosophy that runs through our line of wading footwear. While not specific to a product feature, this designation does indicate that the product includes features and/or materials that are more resistant to "hitch-hiking" organisms – have less exposed stitching, fewer ridges & pockets and utilize non-absorbent materials – all making the boots easier to inspect, clean and dry faster. All of these elements assist anglers in doing their part to prevent the spread of invasive species. For more information, please visit our CleanStream™ page or these organizations: www.cleanangling.org, www.protectyourwaters.net or www.tu.org.
The New RIVERTREAD™ platform is designed for the demanding angler looking for the best wading footwear on the market. RIVERTREAD™ features Simms’ latest engineered components to maximize comfort, performance, and slip-resistance. The molded 3D footbed with arch support and ball flex aligns the foot for all day comfort and optimizes biomechanics. Molded dual-density EVA midsole creates extra cushioning for hiking comfort and enhances proprioception. A Molded and minimal TPU rentention plate allows lightweight cleat retention and enhances proprioception. A molded Vibram® Idrogrip® outsole with 4mm self-sharpening multi-directional lugs permits long lasting traction on trails, slip resistance in water and toe protection. Also available in a 12mm Felt outsole.
- Great Fit and Feel Review by Wes
OverallJust got these boots to replace a different brand that I was having real trouble with getting my foot in. It took me forever to get my boots on! Then I got these and wow! The tongue really opens up so you can just slide your foot right in. And they have great room on the inside while wearing two socks plus the neoprene from the waders so your foot doesn't feel to crammed in there. Great stability and nicely built! Glade I made the switch to Simms boots!!!
(Posted on 1/19/14)
- great :) Review by jen
(Posted on 11/28/13)
Write Your Own Review