Email to a Friendclose
DescriptionRock Creeks are a dime a dozen across the West. But Montana’s version is the gold standard, cutting through the Sapphire and Garnet mountains and crawling with thick trout and ultra-slick wading opportunities. Simms’ Rock Creek Boot, with a full-length retention plate for HardBite™ studs, is the solution to stomping out the slip factor. Anglers will appreciate heavy-duty construction packed into a lightweight boot built for long miles. The cut and buff EVA midsole bolsters stability, while rubber rand toes and heels ramp up abrasion resistance for lasting comfort and durability over a wide range of creeks that rock.
- Lightweight – making it ideal for river conditions that don’t dictate a bigger boot
- Full length retention plate to accept HardBite™ studs
- Cut and Buff EVA midsole for comfort, durability & stability
- Rubber rand on the toe and heel for abrasion resistance
- StreamTread™ Platform
- Waterproof synthetic leather & mesh with rubber toe cap
- Approximate pair weight (size 10): 43.2 oz
- Men's whole sizes: 4
- 14, Width EEE
- Size Chart
Men's Wading Boot Size Chart
To allow proper room for the neoprene stockingfoot, find your regular shoe size in the right-hand columns and order the corresponding Simms Boot in the first column. This will typically be one size up from your normal shoe size for men and one size down for women (ie: a women's USA size 8 would take a men's boot size 7).
(Simms Boot size 5 will fit a Youth Size 4, etc.)
5** 4 37 3 22 6** 5 38 4 23 7 6 39 5 24 8 7 40 6 25 9 8 41 7 26 10 9 42 8 27 11 10 43 9 28 12 11 44 10 29 13 12 45 11 30 14 13 46 12 31 15** 14 47 13 32 16** 15 48 14 33
Not all styles available in all sizes; please see individual boot for size specifics
** Freestone Boot - Streamtread only
- Product Care
For proper cleaning of your footwear to descrease the likelihood of spreading Aquatic Invasive Species, please reference our CleanStream™ page.
If using in saltwater always clean and rinse to prevent corrosion.
Use a brush to remove dust and dirt. Choose an old vegetable brush or toothbrush. For maximum thoroughness, remove laces prior to cleaning. Use specialized boot cleaner, saddle soap or maybe a mild dishwashing soap with luke-warm water.
Do not use bar soap or detergents.
Do not place wet boots close to a heat source (fireplace, campfire, wood stove, radiator, heater, sunny windowsill) as this can weaken adhesives and cause materials to become brittle or shrink.
Dry using natural methods (air dry) and try to keep them out of the sun for long periods of time. Boots dry faster when positioned upside-down. If desired, stuff a sheet or two of newspaper into each boot to absorb moisture. Change the paper each hour.
If you see any mold on your boots, brush in a mixture of 80% water and 20% vinegar.
Over time the use of leather conditioners may provide increased water repellency and can prevent cracking and drying of the leather.
Store footwear in a place where temperatures are stable and normal. Do not store footwear in attics, garages, car trunks or any unventilated spaces.
Never put footwear in washing machine.
CleanStream™ is a design philosophy that runs through our line of wading footwear. While not specific to a product feature, this designation does indicate that the product includes features and/or materials that are more resistant to "hitch-hiking" organisms – have less exposed stitching, fewer ridges & pockets and utilize non-absorbent materials – all making the boots easier to inspect, clean and dry faster. All of these elements assist anglers in doing their part to prevent the spread of invasive species. For more information, please visit our CleanStream™ page or these organizations: www.cleanangling.org, www.protectyourwaters.net or www.tu.org.
The STREAMTREAD™ platform is designed for the angling enthusiast looking for all-round, heavy-duty wading footwear. All the styles that feature the STREAMTREAD™ platform have been proividing our faithful with years of reliable, trustworthy wading confidence. The die-cut footbed offers a sturdy, wading-reading deck and the molded TPU heel clip offers secure heel-hold & lateral stability for all day wading security. Die-cut and molded single density EVA midsole creates cushioning for all day wading comfort. Die-cut, full coverage TPU retention plate allows for maximum rigidity and cleat retention for heavy duty wading. All of this wrapped in a molded VIBRAM® IDROGRIP® rubber outsole with 3MM multi-directional lugs for slip resistance in water and toe protection. Also available in a 12mm Felt outsole.
- Shouldn't be in the Simms lineup Review by Bill Troutslayer
OverallI clocked about 20 fishing trips in the mountains with the boots so far in PA. The loops that hold the laces have torn and the felt is starting to separate. I can understand the felt separating to a degree, but the loops tearing that holds the laces is a non-starter. This makes the boots unusable once that happens.
My plan of buying cheap boots every 2 years has blown up in my face. I didn't realize that cheap boots only last one season. I guess on the bright side, buying a new pair every year is still cheaper than buying expensive ones that don't last me much beyond 2 yrs anyway.
(Posted on 5/19/15)
- Great Boot for the Money Review by Scotty
OverallJust bought these today, after I had a pair of 4 year old Redhead boots disintegrate when I put them on. I spent 6 hours in the river in these new boots. Comfortable, easy on and easy off, good looks, and more stable than my old boots. Looking forward to 8 hours on the river tomorrow. Lots of boot options for $99 in the market place, but I had to go with Simms. All of my Simms saltwater and freshwater fishing gear has held up for me.
(Posted on 3/28/15)
- Garbage boot Review by Streamdream
OverallThis is Simms attempt to compete with Wal-Mart. Nothing but pretty colors for impulse buyers. Fit, quality, support...all junk.
(Posted on 2/5/15)
- Solid Boot at a decent price. Review by Rick P
OverallThese are my fourth pair of SIMMS boots in my current inventory. Each pair are well built and have lasted my 160 plus days per year for the past three years of hiking miles getting to and then in the water.
Got these Rock Creeks for local Winter fishing in cold slimy local waters. Been wearing em for the past six weeks and they already have 29 solid hard days on em averaging over 4-6 miles of river and bank work each day.
They are light yet very stable. The felt soles work wonders with some studs inserted on the toe and heel sections for climbing down and up muddy banks. The boots give great support in deep swift water crossing and best of all, they have kept my feet amazingly warm when working a single section for hours at a time.
Overall I am very pleased with these RC's and the price. Kudos to SIMMS R&D for putting these out on the market.
(Posted on 12/31/14)
- Decent boot, great customer service. Review by Jason
OverallI've had this boot for about 5 months now and everything was fine with it for the first few months for the most part. The main downside is this boot is not extremely comfortable. There is really no arch support and it feels like walking on a flat piece of wood almost.
Just recently the felt on the back heel of the boot has started to pull off, so I called in and they told me they would replace them for free, or I could upgrade and pay the difference. These were my first fly fishing boots, but it's time to upgrade to the G3 boots!
3 stars on the boot... 5 stars on the customer service!
(Posted on 5/22/14)
Write Your Own Review