Email to a Friendclose
DescriptionSorry guys, when you’re wading chest deep through spring runoff, launching laser beam casts to 20-pound steelhead—size matters. Meaning the size that fits. Simms’ Women’s G3 Guide™ Waders are sized right from a slim boot to accommodating upper, with microfleece-lined hand warmer and zippered chest pockets where you need them. The women’s specific cut features patented front/back leg seam construction to minimize wear and delivers enhanced mobility befitting of extra-big pursuits.
FeaturesFABRIC TECH: 5-layer GORE-TEX® Pro Shell Technology in lower – exclusive to Simms/3-layer GORE-TEX® Pro Shell Technology in upper
- 5-Layer GORE-TEX® with 25% more breathability featured throughout the legs for increased durability
- Women’s specific cut features higher chest and patented front/back leg seam construction
- Patented front and back leg seams provide an articulated Women’s specific fit & provide all day comfort
- NEW reach-through hand warmer pocket with increased volume & micro-fleece lining
- NEW zippered Chest Pocket and Integrated Utility Tabs
- NEW Flip-out Tippet Tender™ pocket with dual-entry zippers & retractor docking station
- Adjustable elastic 1.5” suspender with YKK® non-locking buckles
- Built-in low profile belt loops with nylon wading belt
- Abrasion-resistant material for more durable built-in gravel guards
APPROX. WEIGHT: 40 oz
SIZES: S, M, MS, MF, L, LS, XL
Click the Size Chart tab above for measurements.
- Size Chart
Women's G3 Guide™ Stockingfoots Size Chart
Dress Size Bust* Waist* Hips* Largest
S Short** 6 - 8 35" 27" 37" 37" 28" - 29" 6 - 7 S 6 - 8 35" 27" 37" 37" 31" - 32" 6 - 7 M 10 - 12 37" 29" 39" 39" 31" - 32" 8 - 9 M Short 10 - 12 37" 29" 39" 39" 28" - 29" 8 - 9 M Full 10W - 12W 38" 30" 40" 40" 31" - 32" 8 - 9 M Tall** 10W - 12W 38" 30" 40" 40" 33" - 34" 8 - 9 L 14 - 16 39" 31" 41" 41" 31" - 32" 9 - 10 L Short 14 - 16 39" 31" 41" 41" 28" - 29" 9 - 10 L Tall** 14W - 16W 41" 33" 43" 43" 33" - 34" 9 - 10 XL 18 - 20 43" 35" 45" 45" 31" - 32" 9 - 10
*These are body measurements
REGULAR=Women 5'4" to 5'7" | SHORT=Women 5'1" to 5'3" | TALL=Women 5'7" to 5'9"
**Custom Shop Sizes: Small Short, Medium Tall and Large Tall are available for an additional cost.
Why Simms Waders?
- Product Care
GORE-TEX® Wader Care:
The #1 tip to prolonging the life of a wader is drying your waders. It is important to dry your waders out after each use. We recommend drying the inside first (if damp) and then the outside. When drying the outside you can pull your gravel guards up until the feet are dry and then flip them down to dry the rest of the wader
Washing - Use a front load machine or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly start by drying the inside first. Never put your waders in the dryer, the heat will adversely affect the seam tape on your waders and will void your warranty.
Fit - We offer more sizes than anyone, a good fit goes a long way to extending the life of your wader. Make it clear that people should use their exact measurements as we have already provided extra room for layering and movement.
General Care - Do not store inside your car for long periods of time excess heat will damage your waders.
Use A Mat - Always put your waders on using a protective mat to shield the neoprene feet from rocks. The Headwaters gear bag for example has a pull out mat that works great for this.
Proper Layering - Do not wear jeans under your waders. Jeans are highly abrasive wearing on your waders from the inside out. More importantly jeans and sweatpants do not transfer moisture away from the body. Use proper layering (to view our layering collection, go here). Using layers such as these will help wick moisture away from your body and assist in the waders ability to breathe.
Stains - most stain removers will work fine on our waders. As long as the stain remover does not contain bleach you should be o.k.
GORE-TEX® PRO SHELL outerwear is waterproof, exceptionally lightweight and offers the ultimate in breathability, durability and extended comfort. Constructed with a woven backer, GORE-TEX® Pro Shell garments slide easily over other layers and offer exceptional tear strength and internal abrasion-resistance.
Proudly made in the United States of America. Click here to see more of Simms USA-made products.
Little Parts from the YKK® Fastening Products Group create The Big Difference for our customers — fastening solutions intelligently integrated with the finished product to provide the highest quality, most durable gear. The Little Parts — zippers, metal buttons and snaps, and Nylon buckles — all earn the YKK® brand. The Big Difference begins with their obsession to ensure that every individual component renders maximum value to the finished whole. That commitment instills quality and value into every product. Simms utilizes fasteners built to withstand the harshest environments and YKK® provides the best solutions to meet those needs. All Simms outerwear features nylon YKK® zippers to minimize corrosion and provide high performing, durable wear. www.ykkamerica.com.
Write Your Own Review
You may also need...