Guide Boot Care:
For proper cleaning of your footwear to descrease the likelihood of spreading Aquatic Invasive Species, please reference our CleanStream™ page.
Guide boots are made water-repellent full grain Nubuck leather. They require little maintenance but should be cleaned and dried.
If using in saltwater always clean and rinse to prevent corrosion.
Use a brush to remove dust and dirt. Choose an old vegetable brush or toothbrush. For maximum thoroughness, remove laces prior to cleaning. Use specialized boot cleaner, saddle soap or maybe a mild dishwashing soap with luke-warm water.
Do not use bar soap or detergents.
Do not place wet boots close to a heat source (fireplace, campfire, wood stove, radiator, heater, sunny windowsill) as this can weaken adhesives and cause materials to become brittle or shrink.
Dry using natural methods (air dry) and try to keep them out of the sun for long periods of time. Boots dry faster when positioned upside-down. If desired, stuff a sheet or two of newspaper into each boot to absorb moisture. Change the paper each hour.
If you see any mold on your boots, brush in a mixture of 80% water and 20% vinegar.
Over time the use of leather conditioners may provide increased water repellency and can prevent cracking and drying of the leather.
Store boots in a place where temperatures are stable and normal. Do not store boots in attics, garages, car trunks or any unventilated spaces.
Never put boot in washing machine.