- SHOP +
- New Arrivals
- DISCOVER +
- Dealer Locator
- MY ACCOUNT
Free shipping on returns and exchanges guaranteed only through simmsfishing.com
Developed specifically for use with our Vibram® rubber soles, the HardBite™ Star Cleats offer the best stud solution for added stability in difficult wading conditions. Use separately or in combination with our HardBite™ Studs.
Vibram® soles are built from the bottom up and are designed to overcome very specific obstacles on a variety of terrains. Vibram® invests heavily in research and development of products never overlooking even the most minute detail. Vibram® soles boast innovative compounds and technical sole patterns, specifically developed to meet the challenges of many different environments and applications. www.vibram.us
Steamboat David, 4/20/2016
I have used the same set on my Simms Guide boots. I bought them, when the current model first came out. They rock in small creeks, greasy rocks and everywhere else! Still on the first cleats, never had to replace one! I fish 4-6 days a week in the summer and fall.
I often fish until sunset, and they have saved my butt a few times...
They give me confidence in water all over the Rockies!
Thank you Simms!
(Posted on 4/20/2016)
Had these on my last pair of boots. I had the boots for three years. Lost a couple over time due to wear and tear. The traction on these was great on slick river rocks.cant wait to put them on my new boots.
(Posted on 2/25/2016)
First time crossing the river I was missing 2 cleats!
Replacements wont stay on either.
After purchasing 3 sets of waders and boots I would never purchase anything again from Simms since they won't refund or replace the boots.
Tony Iusi Pittsburgh PA
[Response from Simms Customer Care Team]
Thank you for your honest review, Moats. We always recommend that you use a small dab of a urethane adhesive, such as Aquaseal, on the threads of those cleats to ensure a lasting fit. Please feel free to give us a call at 1-800-217-4667 with any further concerns you may have.
(Posted on 8/28/2015)
Steve , 8/24/2015
I have used these cleats for over 5 years and they work. Occasionally I loose one. So I carry extra just in case.
(Posted on 8/24/2015)
3 years of Steelheading and guiding Big BrookTrout on rocky Canadian rivers as well as Lake Superior tributaries with great hookup on ice, rocks,wood and snow/mud. Still in use with 100s of hours and will likely get me thru a couple more years before replacement. My boots will wear out first.
(Posted on 8/19/2015)
John Hartland, 7/7/2015
The screws wear and the cleats fall off well before the cleats are worn out.
I have complained about this to Simms on a couple of occasions and after their initial response requesting pictures they have ignored me completely.
I notice that there is no response to similar comment made here:- WHERE DID THEY GO? REVIEW BY CRAIGSPEY
[Response from Simms Customer Care Team] - We apologize you slipped through the cracks. We unfortunately can't find you in our system so we are unable to contact you. If you wouldn't mind, please contact Customer Care at 888-858-3570 or firstname.lastname@example.org .
(Posted on 7/7/2015)
Steamboat David, 5/28/2015
After 3 seasons of heavy use in Steamboat CO., these cleats are going strong! I haven't replace one and they are still working great!
(Posted on 5/28/2015)
So you sell these in packs of 10... but your install pattern diagram shows 8 being used per boot. So you want us to buy 2 packs and have 4 extras?
[Response from Simms Customer Care Team] - Thanks Tom. I always carry a few extra just in case one gets ripped out. I've been told that was the intention of the 10 puck.
(Posted on 4/1/2015)
I bought new Guide boots and start cleats at the same time. Wouldn't you think that Simms would include in the cleat package enough cleats to install the pattern Simms recommends? I did too. I was wrong. I feel Simms is gaming me.
(Posted on 3/13/2015)
They work great till the screw or the cleat wears out at the hole/screw. Then you look at the sole & find only the screw in the boot! Seams one of the two metals is too soft for the other & allows the star to slip off the screw.
(Posted on 12/18/2014)